|
UnderAire™ Crawl Space
Ventilators
Tjernlund UnderAire™ crawl space fans
ventilate excess moisture -- a
cause
of mold, mildew and wood rot. Increases air
circulation to fight condensation.
Constant
operation helps vent radon, treated wood off-gassing
and odors that might otherwise migrate into living
areas.
The only crawl space ventilators with a special "suitable
for damp locations"
ETL listing.
Galvanized faceplate can be cut to fit openings smaller than
18" x 9".
How to determine the number of UnderAire™ Ventilators
needed:
Calculate the cubic area of the crawl space by multiplying
the length x width x
height. Divide this number by 15 to determine the minimum
CFM necessary to
fully ventilate the space in 15 minutes. Example: 20' wide x
40' long x 3' high
crawl space = 2,400 cubic ft. 2400 cubic ft. ÷ 15 minutes =
160 CFM of
ventilation. Choose two V1 or V1D ventilators or one V2D
ventilator.
V1
(110 CFM) |
One fan and small faceplate for
ventilation openings through brick foundations.
(Requires switch or dehumidistat to activate.
Multiple ventilators may be controlled by a single
switch or dehumidistat). Includes freeze protection
thermostat.
|
|
V1D
(110 CFM) |
One fan and large faceplate sized
for ventilation openings through block foundations.
Includes freeze protection thermostat, dehumidistat and pre-wired 6’
power cord.
|
|
V2D
(220 CFM) |
Two fans and large faceplate sized
for ventilation openings through block foundations.
Includes freeze protection thermostat, dehumidistat and pre-wired 6’
power cord.
|
|
Click to Watch
V1, V1D, V2D Literature |
V1, V1D, V2D Instructions
|
|
DH10 |
Dehumidistat for crawl
space ventilator. Adjustable up to 80 percent
humidity.
|
|
DH10
Instructions
UnderAire™
Crawl Space Vents
The UnderAire™
crawl space vents can be used to provide
foundations with passive ventilation or can
be used along with a fan-powered crawl space
ventilator for maximum effectiveness.
These premium crawl space vents come in two
decorative patterns, both with the following
features:
- Sturdy Galvanized Steel
Construction Increases Product
Durability and Lifespan
- Install from Outside or
Inside of Crawl Space
- 18" x 10" to Cover Block
Foundation Wall Openings
- Professional Modern
Decorative Designs
- Matches Models V1, V1D, V2D
Crawl Space Ventilators
- Easy 5-Minute Installation
- Paintable (Steel Primer
Recommended)
- Mounting Hardware Included
- Factory Approved Accessory
for UnderAire™ Crawl Space Fans
|
Close-up of "Morning Star" Pattern
Close-up of "Steel Diamond" Pattern
|
Increase your crawl space air flow and the
effectiveness of Tjernlund powered Crawl Space
Ventilators with UnderAire™
Crawl Space Vents!
|
UnderAire™
Sealable Foundation Vent The UnderAire™
crawl space vents can be used to provide
foundations with passive ventilation or can
be used along with a fan-powered crawl space
ventilator for maximum effectiveness.
These units not only
provide ventilation during the warmer
months, but also include a winter guard
which allows homeowners to fully seal the
crawl space during the heating
season--greatly improving the home's energy
efficiency.
Tjernlund UnderAire™
crawl space vents can be completely
installed from the outside of the crawl
space in minutes.
|
- Increase crawl space air
flow to
decrease moisture
- Increase the effectiveness
of Tjernlund UnderAire™
powered crawl space ventilators
- Reduce
heat loss through crawl space
vents during the heating season
- Help
prevent pipes from freezing
- Open
and close easily from the
exterior
- Feature
a heavy duty screen and high
quality ABS
- Have a
clean, finished appearance with
a paintable frame
|
FV1 Instructions
|
|
|
